Upon entering Open Firmware, enter the following: boot that does not work, enter the following: boot neither of those work, try again after taking the USB out and putting back in (no matter what do this once - trust me). Once, this is done, restart the G5 with the flash drive inserted and press commadn-option-f to enter open firmware. Use -f if you have trouble, then run this command again (make sure to wait until the drive is fully written to): sudo dd if=/Users/tom/Downloads/ of=/dev/disk3 bs=16m & sync You might find this fails, so if your disk identifier is 3 like the example, run this command first: sudo diskutil unmountDisk disk3 Here is an example with user name tom and disk3 sudo dd if=/Users/tom/Downloads/ of=/dev/disk3 bs=16m & sync Sudo dd if=/Users//Downloads/ of=/dev/disk# bs=16m & sync Then, still within the Terminal, execute this command to format your flash drive and lose all the information (where disk# = disk3 or disk7 or whatever the above shows you): sudo diskutil eraseDisk JHFS+ Test disk# (If you cannot access, Mac OS X, then insert the OS X CD/DVD with command-C and open a Terminal from within the install OS.) iso is on your desktop.Īfter this, find the number of your flash drive, e.g., disk, disk2, disk3, or disk7, you never know so run this and look for the flashdrive's brand next to the BSD identifier. First, download the last PPC Ubuntu-MATE here.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |